Plunger Pumps: Common Knowledge for Cleaning Plunger Pumps
Release Date:
2021-03-03 11:34
Source:
I. Plunger pump The permissible operating pressure is high, which is a major characteristic of plunger pumps.
Second, flow can be easily varied simply by adjusting the plunger’s stroke.
3. The main components of the plunger pump are subjected to high pressure, allowing the material’s strength properties to be fully utilized.
A plunger pump achieves oil suction and crude oil delivery by utilizing the change in sealed volume caused by the reciprocating motion of the plunger within the cylinder.
The following is cleaning. Plunger pump Precautions :
1. Do not use kerosene, gasoline, alcohol, steam, or other liquids to prevent corrosion of hydraulic components, pipelines, oil tanks, and seals;
2. During the cleaning process, the hydraulic pump can operate concurrently with the cleaning operation, and the working fluid can be heated simultaneously. When the temperature of the cleaning fluid is maintained at (50–80)°C, rubber contaminants within the system are readily removed.
3. During the cleaning process, a non-metallic hammer handle may be used to strike the oil pipe continuously or intermittently to facilitate the removal of fittings within the pipeline. (3) During the cleaning process, a non-metallic hammer handle may be used to strike the oil pipe continuously or intermittently to facilitate the removal of fittings within the pipeline.
4. Plunger pump Intermittent operation is conducive to improving the cleaning effect; the typical intermittent interval is 10–30 minutes:
5. When cleaning the oil circuit, a filter or strainer should be installed. At the start of the cleaning process, due to the high level of contaminants, an 80-mesh filter may be used; after cleaning, a filter with 150 or more mesh can be employed.
6. The cleaning duration is typically (48–60) hours, depending on factors such as system complexity, filtration accuracy requirements, and the degree of contamination.
7. To prevent corrosion caused by external moisture, the hydraulic pump shall be operated continuously until the cleaning is complete and the temperature has returned to normal.
8. After cleaning the hydraulic station, the flushing oil in the control circuit must be completely drained.
Jiangsu Jiekai Petroleum Equipment Technology Co., Ltd. boasts sophisticated manufacturing processes, reliable testing methods, and excellent after-sales service, and has established a comprehensive quality assurance system. Its main products are: : Valve box, hydraulic end, Three-cylinder plunger pump 、 Oil drilling and production 、 Plunger pump, oil fracturing Wait—come on in and make your selection!
Recommended Articles
Service Hotline:
+86 (0)-510-86979095
Fax: +86 (0) 510 8623 7108
Email: info@jkpetro.com
Add: No.527 Shashan Street, Zhouzhuang Town, Jiangyin, Jiangsu, P.R.C
COPYRIGHT © 2020 Jiangsu Jiekai Oil Equipment Technology Co. Ltd | Business License